GSM Trainer
Experiments Included:
Introduction to Sections of GSM Trainer
Introduction to GSM Trainer Software
Exploring Call Options using AT Commands
Exploring Call Log Options using AT Commands
Exploring SMS Options using AT Commands
Exploring Volume Control Options using AT Commands
Exploring Phone Book Options using AT Commands
Exploring Network and Clock Options using AT Commands
DTMF Tone generating using AT Commands
Software Application using GSM Trainer
Category: Telecommunication Technology Products
The GSM trainer IT-701 allows the student a closer look at the core of modern day mobile equipment and its working as a GSM modem. This trainer allows the control using standard AT commands and provides the study of AT commands to use the SIM card features using PC. An extensive PC based software is provided to explore the features of GSM module.
Features:
Power Supply Included
Required Circuits Tested
Each Section Clearly Marked for Input and Output
Built-in Amplifier
Built-in Protection Circuit
Each Section Clearly Marked for Easy Understanding
Technical Features:
GSM capability: GSM 900 / 1800, E – GSM
SIM Interface
EGSM Sensitivity: < -104 dBm
DCS Sensitivity: < -102 dBm
Selectivity: >+9 dBc @ 200 KHz
Selectivity: >+41 dBc @ 400 KHz
Dynamic range: 63 dB
Inter modulation: >-43 dBm
Maximum output power: 33 dBm ± 2 dB (EGSM)
Maximum output power: 30 dBm ± 2 dB (DCS)
Minimum output power: 5 dBm ± 5 dB (EGSM)
Minimum output power: 0 dBm ± 5 dB (DCS 1800)
Noise in 925 – 935 MHz: < -67 dBm
Noise in 935 – 960 MHz: < -79 dBm
Noise in 1805 – 1880 Mhz: < -71 dBm
Phase error at peak power: < 5° RMS
Frequency error: ± 0,1ppm max
Interconnections: 2mm goldplated pins
Accessories: USB cable, GSM Antenna with SMA connector, Hands free kit, Software CD and Experiment Manual, Power cord